Tel.: (+34) 678 18 13 20
Ihr solar-rapid® und Abripool®-Vertriebspartner
Dirk Hanisch, 18690 Almuñécar
With a solar-rapid® pool heating system you can of course also warm up the water in your natural swimming pool free of charge.
solar-rapid 25 pipe
The solar-rapid® 25 pipe has a diameter of 25mm.
Its special shape means a triple surface area. Like this the heat is absorbed much better.
In addition, the special moulding of the ROOS-solar ribbed tube provides more stability. This is why only 1/4 of the thickness of the material is sufficient as compared to other solar tubes with a smooth surface.
Easy fastening of the ROOS-solar collector:
On inclined or vertical surfaces, the collector is only fastened at the top.
On flat surfaces, the collector just needs to be placed.
It is storm-proof!
Quick and secure fixation
No glueing on the roof
No drilling holes into the tiles
If necessary, it can be taken away rapidly
Storm-proof even in tropical storms
ROOS-collector on the caribbean island "Guadeloupe".
It resisted hurricane "George" (September 1998) without damage..
The collector's special construction ensures that the wind is diverted between the ROOS-solar ribbed tubes and avoids the so-called "sail-effect".
Rain simply runs off
Rain or melted snow and ice can easily pass through the spacings between the ROOS-solar ribbed tubes.
On solar panels made of rubber or else , on the contrary, the water stagnates.
No calcareous deposits
The large diameter of the ROOS-solar ribbed tubes, 25 mm, combined with the material's extension and contraction due to temperature changes, ensures that even small sediments crumble and are flushed away.
Secure and leak proof
The parts of which the ROOS-collector consits are tested under a pressure of 3 bar. Pools usually operate with a pressure of max. 1.5 bar. This guarantees a secure reserve and absolute density.
The special moulding of the ROOS-solar ribbed tube reinforces the material against pressure from outside and against suction from inside due to the partial vacuum resulting from the water's circulation.
Rodents don’t like the material
Rodents are very much attracted by collectors made of rubber.
The ROOS®-solar collector, on the contrary, is made of special UV-resistant, very solid and rigid plastics.
"... why you should neither insulate it nor cover it with glass?"
To cover the ROOS-solar collector with glass or to insulate it is absolutely superfluous.
A solar pool heating operates within the low-temperature domain. The difference between the temperature of the circulating water and the surrounding temperature consists of only a few degrees.
The loss of heat can be neglected.
It is important that the heat absorbed and transmitted to the water flowing through the collector is immediatly transported into the pool.
The pool functions as a heat accumulator.
The weight of the ROOS-solar collector:
filled: approx. 10 kg / m2,
empty: approx. 3 kg / m2.
Every square meter of your collector contains about 7 kg
(= 7 litres) of water.